When you buy through links on our site, we may earn an affiliate commission.

How To Clean A Baby Walker: An Easy Guide On How To Clean Baby Walker Seat

By Amy A. Vincent | Fact checked by Jenny Lord | Updated on September 11, 2021

Cleaning is not always the most enjoyable task, but it’s something that must be done, especially if you have a baby walker! Babies sometimes spit up or have their diapers leak when sitting in the walker. So, it’s important to clean the baby walker on occasion.

Otherwise, a lot of bacteria or germs will take place in the walker that might make the baby sick. In this blog post, we’ve come up with an easy guide on how to clean a baby walker.

How To Clean A Baby Walker?

How to Clean a Baby Walker
Courtesy – Canva Pro

Before you start, take a closer look at your baby walker’s design. There are two main parts: fabric for the seat and plastic with metal components. Some of them come with gripper strips and toys attached to them for added playtime during development.

Also read: Best baby jumper walker

How to clean baby walker seat?

Step 1: Remove the seat cover

First, detach the fabric seat cover by removing the Velcro straps, lift it upwards and unpin from the metal frame. Proceed with a gentle shake to remove any dust that may have accumulated on top of the fabric before washing or put it in your washer machine.

Step 2: Use mild soap or detergent for cleaning seat fabric

Use mild soap or detergent for cleaning baby walker seat fabric
Courtesy – Canva Pro

Use a mild soap or detergent for the seat fabric. We recommend using a mild soap. It will help prevent the material from fading and corroding. You can also use vinegar if you prefer it over other options. Vinegar will keep the seat fabric soft and comfortable.

Step 3: Use cold water for washing the fabric

You should use cold water while cleaning the baby walker. You can also throw the seat fabric into the washing machine if it is machine washable. But you should also use cold water there. It’s because hot water can shrink or bleed the fabric’s color.

Step 4: Never dry the fabric using a dryer

It’s not recommended to use a dryer when it comes to fabric. The heat from the dryer can damage or shrink the material and make it look old, faded, and worn out. It will also cause any stains on your seat cover to become permanent!

Step 5: Let it air-dried

You can let the fabric air-dry by hanging it up or laying it down. Avoid direct sunlight and heat sources that might damage your walker seat cover!

How to clean the body parts of the walker?

Step 1: Disassemble the baby walker

First, start with disassembling the parts. You need to take out all of the plastic and metal components from it in order for them to get cleaned separately.

You can follow the manufacturer’s guidelines to make those parts separate. Breaking the walker down and cleaning each specific section individually will give you the best results. It will also allow you to dry the walker quickly.

Step 2: Washing plastic parts

Once you have all of the parts separated from each other, wash them with a soapy solution. Use only mild soap and warm water to clean plastic surfaces as they remove the grease and grime and make the plastic pieces germs-free.

It’s also a good idea to wipe down the plastic parts with a damp cloth if you don’t have the time or energy to wash them off fully. After that, dry and sanitize them but make sure there is no grease or grime left.

Step 3: Use soap and sanitizer for the toys

Use soap and sanitizer for the toys
Courtesy – Canva Pro

Use soap and warm water to wash the toys that come with baby walkers. It’s best to use a gentle soap or solution for this task as they are made of plastic, wood, or cloth material.

But it is advisable to avoid using detergent, water, or wiping with a wet fabric on electronic toys because this can damage the machine. Just clean them with a dry cloth.

If the toy labels say they are non-toxic, you can sanitize them afterward to kill any germs that may have been transferred from the hands of your child.

“Infections in small babies can be pretty serious,” says Tanya Remer Altmann, MD, a pediatrician, and author of Mommy Calls. “They can get very sick quite quickly.”

Step 4: Wash and dry the gripper strips

Wash the gripper strips with soap and water. Your baby walker will be more durable if you wash them once a month because it removes dirt, oil, or dust that can accumulate in this area. Take care to dry these parts well after washing, so they don’t rust over time.

Step 5: Reassemble the baby walker

Once all the wet baby walker components have dried, carefully reassemble it as per the manual. Place the seat, tray, and toy bar back on. Place all the screws in place to hold these pieces together and tighten them with a Phillips screwdriver.

Step 6: Spray it with an admirable perfume

In order to keep your baby walker from having that old smell, spray it down with a pleasant perfume to mask any odors.

Also read about: How to remove hair from baby walker wheels

Be sure to read the following safety warnings and cautions

Keeping your baby’s walker clean doesn’t have to be a chore if you take these steps:

  1. Wash the toy properly so that there’s no dirt or dry food left on it and never leave any water standing in remaining crevices; otherwise, bacteria can grow rapidly!
  2. Dry off all parts of the walker thoroughly after using soap – anything from where they eat their snacks to how much floor space they cover during playtime should get this treatment.
  3. Corrosion can happen when metal is exposed to water. You should dry it properly using a dry fabric or tissue before put it together in the baby walker.
  4. Keep electronic toys out of reach (preferably as far back from moisture sources like sinks as possible).
  5. After cleaning and sanitizing, rinse the soapy water off completely.
  6. You should put the walker outside in a dry place to make sure all water is completely dried.
  7. Never use a dryer to dry the fabric because it can cause damage.

Wrapping-up:

Now that you know how to clean a baby walker with household items, please share this article on the following social media networks. If you have any questions about our strategy for cleansing your child’s toy, just let us know! We’re always happy to help out and answer all of your parenting-related questions.

Thank you for reading our blog post on How To Clean A Baby Walker; if so, please share it with friends who might find it helpful too!

Sharing is caring!

Leave a Comment